Ambrogio Robot: Blade Blocked
Having this problem with your Ambrogio Robot? Start with the checks below before buying parts or resetting the mower.
First checks
- Switch the mower off safely before inspecting the cutting system.
- Remove packed grass and debris around the blade disc without forcing the motor.
- Check that the disc rotates freely when the manufacturer procedure permits.
- Inspect blades, screws and disc for damage before considering a motor fault.
Important: exact LED meanings, error codes and reset procedures can vary by model and firmware. Confirm your exact mower before replacing components.
What usually causes this type of problem?
Common fault areas include power or charging connections, installation/wiring, obstruction or contamination, positioning/connectivity, battery condition, or a model-specific sensor/motor fault. The exact order of checks depends on your mower model.
Continue with one guided diagnosis
MowerFixAI will carry this fault into the diagnosis, ask about your exact model and narrow down the likely cause before you buy parts or book a repair.
Start DiagnosisFull diagnostic access €4.99 once · Takes about 2 minutes