Ambrogio Robot: Charging Station Light Problem
Having this problem with your Ambrogio Robot? Start with the checks below before buying parts or resetting the mower.
First checks
- Confirm the charging station has power and inspect its status light.
- Clean and dry the mower and station charging contacts.
- Seat the mower manually and check whether charging begins.
- Inspect the low-voltage cable, power supply and visible connectors for damage.
Important: exact LED meanings, error codes and reset procedures can vary by model and firmware. Confirm your exact mower before replacing components.
What usually causes this type of problem?
Common fault areas include power or charging connections, installation/wiring, obstruction or contamination, positioning/connectivity, battery condition, or a model-specific sensor/motor fault. The exact order of checks depends on your mower model.
Continue with one guided diagnosis
MowerFixAI will carry this fault into the diagnosis, ask about your exact model and narrow down the likely cause before you buy parts or book a repair.
Start DiagnosisFull diagnostic access €4.99 once · Takes about 2 minutes