Mammotion LUBA: Positioning Float
Having this problem with your Mammotion LUBA? Start with the checks below before buying parts or resetting the mower.
First checks
- Check antenna/RTK power and app connectivity.
- Look for new obstructions near the antenna, base or problem area.
- Confirm the mower has a clear enough sky view for its positioning system.
- Avoid deleting a working map until power, signal and firmware/app status have been checked.
Important: exact LED meanings, error codes and reset procedures can vary by model and firmware. Confirm your exact mower before replacing components.
What usually causes this type of problem?
Common fault areas include power or charging connections, installation/wiring, obstruction or contamination, positioning/connectivity, battery condition, or a model-specific sensor/motor fault. The exact order of checks depends on your mower model.
Continue with one guided diagnosis
MowerFixAI will carry this fault into the diagnosis, ask about your exact model and narrow down the likely cause before you buy parts or book a repair.
Start DiagnosisFull diagnostic access €4.99 once · Takes about 2 minutes