Worx Landroid: Offline Wifi
Having this problem with your Worx Landroid? Start with the checks below before buying parts or resetting the mower.
First checks
- Confirm the exact model and record the complete message shown in the mower/app.
- Check battery charge, mower power state and charging-station power.
- Restart using the manufacturer-approved procedure.
- If the fault returns, use model-specific diagnosis before replacing parts.
Important: exact LED meanings, error codes and reset procedures can vary by model and firmware. Confirm your exact mower before replacing components.
What usually causes this type of problem?
Common fault areas include power or charging connections, installation/wiring, obstruction or contamination, positioning/connectivity, battery condition, or a model-specific sensor/motor fault. The exact order of checks depends on your mower model.
Continue with one guided diagnosis
MowerFixAI will carry this fault into the diagnosis, ask about your exact model and narrow down the likely cause before you buy parts or book a repair.
Start DiagnosisFull diagnostic access €4.99 once · Takes about 2 minutes