Automower Flashing Green Light: ECO Mode Explained
A flashing green Husqvarna Automower station often means ECO mode is active, so loop and guide signals are switched off while the mower is parked.
Quick answer
On supported models, a flashing green charging-station LED can be normal: ECO mode switches loop, guide and charging-station signals off while the mower is parked.
Check these in order
- Check whether ECO mode is enabled.
- Wait for a scheduled start to see whether signals return normally.
- Do not treat flashing green as a wire break without checking ECO mode first.
- If the mower should be operating but still reports a signal error, continue model-specific troubleshooting.
Safety: Switch off and isolate the mower before touching blades, exposed wiring, charging contacts or internal components. Do not bypass safety systems.
What the symptom tells you
The useful question is not just “which part could be bad?” but where in the system the failure begins. Record the exact message, LED/status indicators and whether the problem happens everywhere or only in one part of the lawn. That evidence helps separate installation, positioning, charging, connectivity and mower-hardware causes.
If a basic check does not clearly identify the cause, avoid replacing multiple parts by trial and error. Use the guided MowerFix AI diagnosis or a qualified dealer for internal electrical and safety-critical work.
Continue with MowerFix AI
Turn the symptom into a model-specific diagnostic path.
Diagnose my mowerFind a nearby dealerParts diagramsMap & boundary helpRelated Husqvarna help
Frequently asked questions
What should I check first for Automower Flashing Green Light?
Start with the non-invasive checks listed above and record the exact mower/app message before replacing parts.
Should I replace a part immediately?
No. Confirm power, connections, installation conditions and the exact error first. MowerFix AI is designed to narrow the likely cause before parts are ordered.
When should I contact a dealer?
Use a dealer for persistent electronic, battery, internal charging, motor, safety-sensor or sealed-hardware faults, or whenever the manufacturer procedure requires service tools.
Manufacturer reference
This MowerFix AI guide is a troubleshooting aid. Confirm model-specific procedures and safety instructions with the manufacturer.