Worx Landroid Test Loop: Diagnose Boundary Wire Faults
Use a short temporary boundary-wire test loop to determine whether a Landroid E1/wire-missing problem is in the lawn installation or mower/base.
Quick answer
Worx publishes a test-loop procedure using a short piece of boundary wire connected directly to the charging station.
Check these in order
- Obtain a short suitable piece of boundary wire.
- Connect both ends to the charging-station boundary terminals.
- Lay it as a small loop on the ground.
- Place Landroid inside the loop/on the base as instructed.
- If the error disappears, investigate the permanent lawn loop.
Safety: Switch off and isolate the mower before touching blades, exposed wiring, charging contacts or internal components. Do not bypass safety systems.
What the symptom tells you
The useful question is not just “which part could be bad?” but where in the system the failure begins. Record the exact message, LED/status indicators and whether the problem happens everywhere or only in one part of the lawn. That evidence helps separate installation, positioning, charging, connectivity and mower-hardware causes.
If a basic check does not clearly identify the cause, avoid replacing multiple parts by trial and error. Use the guided MowerFix AI diagnosis or a qualified dealer for internal electrical and safety-critical work.
Continue with MowerFix AI
Turn the symptom into a model-specific diagnostic path.
Diagnose my mowerFind a nearby dealerParts diagramsMap & boundary helpRelated Worx help
Frequently asked questions
What should I check first for Worx Landroid Test Loop?
Start with the non-invasive checks listed above and record the exact mower/app message before replacing parts.
Should I replace a part immediately?
No. Confirm power, connections, installation conditions and the exact error first. MowerFix AI is designed to narrow the likely cause before parts are ordered.
When should I contact a dealer?
Use a dealer for persistent electronic, battery, internal charging, motor, safety-sensor or sealed-hardware faults, or whenever the manufacturer procedure requires service tools.
Manufacturer reference
This MowerFix AI guide is a troubleshooting aid. Confirm model-specific procedures and safety instructions with the manufacturer.