i108E: Wheel motor fault
If your Segway Navimow i108E has wheel motor fault, investigate the fault systematically before replacing parts.
Quick answer
If your Segway Navimow i108E has wheel motor fault , investigate the fault systematically before replacing parts.
What matters on the i108E
This Navimow model is a wire-free mower, so map quality, positioning, station placement and the approach path can matter as much as the mower hardware itself.
Use the exact error text shown by the mower or app. Similar wording across mower generations does not always mean the same component has failed.
Start with these checks
- Switch the mower off and isolate it.
- Remove grass, string or debris around the affected wheel.
- Check for obvious binding or mechanical damage.
- If one wheel repeatedly fails on clear level ground, run the model-specific diagnosis before ordering a motor.
- Power the mower down safely.
- Inspect the affected wheel for grass, string, stones or physical binding.
Stop if: the mower has damaged wiring, a swollen/damaged battery, severe vibration, water inside electrical areas, or would require opening sealed electronics.
Likely causes
Debris around the drive wheel, gearbox resistance, wiring or wheel-motor failure.
Replacement parts
Do not order a component from the symptom alone. Run the model-specific diagnosis first so the failed system can be narrowed down before checking the European parts routes.
Get the model-specific diagnosis
MowerFix AI can take you through the diagnostic path for your exact mower and help narrow the likely failed component before you buy parts.
Diagnose my i108EFull access is included with the €4.99 one-time MowerFixAI lifetime access.
Safety: switch off and safely isolate the mower before inspection. MowerFix AI provides troubleshooting guidance, not a guaranteed diagnosis. Confirm exact part compatibility before ordering.
Before buying parts
Do not order a wheel motor until debris, tyre/wheel binding, cable condition and terrain have been ruled out.
i108E Wheel / drive issue FAQ
Can I keep mowing with this i108e: wheel motor fault fault?
If the mower is repeatedly stopping, vibrating, failing to charge/dock or reporting a safety-related warning, stop and diagnose the cause first. Continuing can turn a minor obstruction or installation problem into a larger repair.
Should I replace a part immediately on my i108E?
Do not order a wheel motor until debris, tyre/wheel binding, cable condition and terrain have been ruled out.
What information should I record before contacting a dealer?
Record the exact error/message, charging-station light or app status, when the fault occurs, whether it is location-specific, and any recent changes to the garden, station, map, boundary wire or mower firmware.
When should the i108E go to a professional repairer?
Use a dealer or qualified repairer when the fault persists after safe external checks, when sealed electronics or battery packs would need opening, when wiring/electrical testing is required, or when the manufacturer procedure calls for service.
How this guide is prepared
Prepared by MowerFix AI. We separate manufacturer-supported troubleshooting from owner observations and avoid presenting an unverified part as a confirmed repair. Last reviewed: .