Worx Landroid M700 Plus (WR167E): Outside working area

What this fault means

The mower detects itself outside its wire-defined territory.

Safety: Stop the mower and follow the manufacturer safety instructions before physical inspection.

Step-by-step checks

1. Turn power off and place the mower well inside the lawn.
2. Confirm the base LED is green/normal.
3. If the mower is inside but reports outside, reverse/check the boundary-wire ends at the station as specified by Worx.
4. Inspect the loop for a cut or poor connection if the station LED is abnormal.
5. Restart only after the installation state is normal.

Evidence source: Manufacturer/support reference

Evidence checked 2026-08-25. Diagnostic procedures are labelled separately from manufacturer-exact error instructions.

Did one of these checks actually fix the mower?

Confirmed repair outcomes improve MowerFixAI for the next owner and help separate common symptoms from real component failures.