Worx Vision M600 (WR206E): Can’t find charge station

What this fault means

Landroid cannot reach the base before battery depletion or cannot follow the return route.

Safety: Stop the mower and follow the manufacturer safety instructions before physical inspection.

Step-by-step checks

1. Take the mower to the station and allow it to charge.
2. Inspect the boundary route back to the station for new obstacles, damage or excessive length.
3. Check for wheel slip on wet/soft ground and clean wheel treads.
4. Verify the base approach is flat and contacts are aligned.
5. If the same route fails repeatedly, inspect that section of boundary installation before replacing the battery.

Evidence source: Manufacturer/support reference

Evidence checked 2026-08-25. Diagnostic procedures are labelled separately from manufacturer-exact error instructions.

Did one of these checks actually fix the mower?

Confirmed repair outcomes improve MowerFixAI for the next owner and help separate common symptoms from real component failures.