Landroid M500 Plus (WR165E): Charging station problem
If your Worx Landroid M500 Plus (WR165E) has charging station problem, investigate the fault systematically before replacing parts.
Quick answer
If your Worx Landroid M500 Plus (WR165E) has charging station problem , investigate the fault systematically before replacing parts.
What matters on the Landroid M500 Plus (WR165E)
This Landroid model uses a physical boundary-wire installation, so loop continuity, wire connectors and charging-base status are relevant to several navigation faults.
Use the exact error text shown by the mower or app. Similar wording across mower generations does not always mean the same component has failed.
Start with these checks
- Confirm mains power reaches the station.
- Inspect accessible station connectors and charging contacts.
- Check the station indicator and record its colour/pattern.
- Do not open live or sealed electrical assemblies unless qualified.
- Confirm mains power and the low-voltage supply to the charging station.
- Inspect and clean accessible mower/station charging contacts.
Stop if: the mower has damaged wiring, a swollen/damaged battery, severe vibration, water inside electrical areas, or would require opening sealed electronics.
Likely causes
Station power supply, contacts, connectors, loop electronics or docking alignment.
Replacement parts
Do not order a component from the symptom alone. Run the model-specific diagnosis first so the failed system can be narrowed down before checking the European parts routes.
Get the model-specific diagnosis
MowerFix AI can take you through the diagnostic path for your exact mower and help narrow the likely failed component before you buy parts.
Diagnose my Landroid M500 Plus (WR165E)Full access is included with the €4.99 one-time MowerFixAI lifetime access.
Safety: switch off and safely isolate the mower before inspection. MowerFix AI provides troubleshooting guidance, not a guaranteed diagnosis. Confirm exact part compatibility before ordering.
Before buying parts
Do not order a battery first. A power-supply, contact or docking problem can look like a failed battery.
Landroid M500 Plus (WR165E) Charging issue FAQ
Can I keep mowing with this landroid m500 plus (wr165e): charging station problem fault?
If the mower is repeatedly stopping, vibrating, failing to charge/dock or reporting a safety-related warning, stop and diagnose the cause first. Continuing can turn a minor obstruction or installation problem into a larger repair.
Should I replace a part immediately on my Landroid M500 Plus (WR165E)?
Do not order a battery first. A power-supply, contact or docking problem can look like a failed battery.
What information should I record before contacting a dealer?
Record the exact error/message, charging-station light or app status, when the fault occurs, whether it is location-specific, and any recent changes to the garden, station, map, boundary wire or mower firmware.
When should the Landroid M500 Plus (WR165E) go to a professional repairer?
Use a dealer or qualified repairer when the fault persists after safe external checks, when sealed electronics or battery packs would need opening, when wiring/electrical testing is required, or when the manufacturer procedure calls for service.
How this guide is prepared
Prepared by MowerFix AI. We separate manufacturer-supported troubleshooting from owner observations and avoid presenting an unverified part as a confirmed repair. Last reviewed: .